Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Paterson, NJ
Paterson gates are a different animal from what you’ll find in most New Jersey towns. In a city built on 1880s – 1920s brick rowhouses, two- and three-family conversions, and former mill housing, the gate at the end of a shared driveway or the mouth of a rear alley is doing real security work every day, and it’s usually hanging on brick piers or wood posts that have been repainted and re-pointed more times than anyone can count. We handle Gate Installation here with the era and the materials in mind: wrought-iron and steel gates original to the property, narrow side yards, freeze-thaw winters that heave shallow footings, and humid summers that push rust through old paint. Call (833) 946-4320 and we’ll get your gate moving again.
Why Paterson Homes Are Different
Start with the housing. Paterson is dominated by brick rowhouses, multi-family conversions, and former mill-worker housing, which means gates here are rarely freestanding garden gates at the edge of a lawn. They’re shared driveway gates, rear-alley security gates, and iron passage gates between attached buildings, and they’re often the only barrier between a tenant’s car and a public alley. That changes the stakes on every repair and every installation.
Then the iron. Paterson has a large stock of historic wrought-iron and early steel fencing, much of it original to the silk-mill era, and much of it repainted repeatedly over rust rather than replaced. When we work on those gates, matching or salvaging period ironwork is usually part of the job, not a swap-in of modern prefab panels.
The valley adds its own pressure. Cold freeze-thaw winters heave posts set in shallow footings and crack brick piers; humid summers speed up rust on older iron; and occasional flood-stage events along the Passaic River corridor leave silt and debris jammed into bottom tracks and hinges on the lower streets. Gates that sit fine in dry weather can bind and drag after a wet stretch.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Paterson Services
Two jobs come up more than any other for Paterson property owners: fixing a gate that’s failed, and repairing the electric or automated system that moves it.
Gate Repair in Paterson
Most Paterson gate problems trace back to hinges lagged into mortar that’s been re-pointed a few times and won’t hold a screw, or to a steel gate that’s rusted through at the pivot. In the 1st Ward rowhouse blocks off Straight Street, alley gates are frequently hung between two neighboring brick buildings on shared piers, so a sagging gate quickly becomes a boundary question. We look at the mounting before we touch the gate, then deal with the swing, the latch, the track, or the frame. Whether it’s a manual iron gate or a heavy driveway panel, we sort it. For the full breakdown, see gate repair.
Electric Gate Repair in Paterson
Electric work is a core service for us, not an add-on. We handle control board diagnosis and programming, motor replacement, loop detector and safety sensor alignment, and access-system wiring on the operator brands we know well. Multi-family properties and small commercial lots in Paterson often run their gate many times a day, and the failure usually shows up in the operator long before the gate itself. If your gate is slow, reversing, or dead at the keypad, we trace the fault through the control system rather than guessing at parts. Full details on our electric gate repair page.
Gate Installation in Paterson
Installing a gate in Paterson means working with the city’s building stock rather than against it. The 1880s – 1920s brick rowhouses and former mill housing that make up most of the city come with narrow side yards, shared rear alleys, and mounting points on brick piers or aging wood posts, so the first question isn’t which gate to buy – it’s what will actually hold it. Freeze-thaw winters heave anything set in a shallow footing, and the iron and steel gates original to many of these properties are often heavier than a modern panel of the same size. We measure, we look at the piers and posts, and we put a written price in front of you before any work starts.
We install manual and automated gates, and because we also repair them, a property owner whose old gate is beyond saving doesn’t have to start over with a different contractor. If you’re comparing options, our Gate Installation work covers everything from a single driveway gate to a full operator system.
Driveway Gate Installation
Signs you need it
You need a new driveway gate when the existing one has rusted through at the pivot points, scraped the ground for more than a season, or the brick pier it hangs from has cracked to the point where it can’t hold a hinge.
What it costs in Paterson
A driveway gate installation typically runs $1,800 – $5,500 installed for a manual swing gate, with automated setups priced higher per the written estimate.
How we do it
We walk the property and check the existing piers and posts, measure the opening and clearances, then set proper footings, hang and align the gate, and test the swing and latch before we leave.
Automatic Gate Installation
Signs you need it
An automatic installation makes sense when your gate is too heavy or too far from the car to open by hand comfortably, or when a multi-family driveway needs entry control instead of a padlock and chain.
What it costs in Paterson
An automatic gate installation typically falls in the $2,500 – $7,500 range installed, depending on the operator and the access control you choose, with the written estimate setting the final price.
How we do it
We size the operator to the gate’s weight and cycle count, mount the arm or slide unit, run and protect the power and control wiring, align the safety edges and loop detectors, and program the entry devices.
What Gate Installation Costs in Paterson
| Item | Typical range in Paterson |
|---|---|
| Manual driveway gate installation | $1,800 – $5,500 |
| Automatic gate installation | $2,500 – $7,500 |
| Sliding gate installation | $2,000 – $6,500 |
How much does a new gate cost in Paterson?
A new manual gate typically runs $1,800 – $5,500 installed in Paterson, and automated systems $2,500 – $7,500. The material, the opening width, and whether the existing piers and posts can be reused move the number. Call (833) 946-4320 for a free written estimate.
Do you handle the power run and the safety edges?
Yes. On an automated install we run and protect the power and control wiring, mount the operator, and align the safety edges, loop detectors, and entry devices. Electrical work at the panel should always be done by a licensed electrician. Estimates are free – call (833) 946-4320.
Brands We Service in Paterson
We work on BFT, Linear, Viking, and Ghost Controls systems specifically, along with the rest of the nine major gate brands we cover, and we know each one’s known failure points and programming quirks. Parts aren’t stocked – we diagnose first, then order what’s needed, which usually keeps turnaround tight. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Paterson, NJ
| Service | Typical range in Paterson |
|---|---|
| Manual driveway gate installation | $1,800 – $5,500 |
| Automatic gate installation | $2,500 – $7,500 |
| Sliding gate installation | $2,000 – $6,500 |
In Paterson, price climbs with the weight and material of the gate, the condition of the brick piers or posts it hangs from, and how much wiring an automated system needs. Every job is quoted and agreed before any work starts, so the written estimate is the price you pay.
Neighborhoods We Serve in Paterson
We work throughout Paterson, including the rowhouse blocks and shared alleys that define so many of its neighborhoods. Because the city is compact, we can usually reach most addresses in Paterson quickly during dispatch hours and give you a straight answer on timing when you call.
- 1st Ward
- Straight Street area
- Passaic River corridor
- Downtown Paterson
Service Area – Cities Near Paterson
Paterson sits in the Passaic River valley, and we also work in the surrounding towns: Haledon, NJ, North Haledon, NJ, Prospect Park, NJ, and Hawthorne, NJ. The same freeze-thaw winters and aging brick piers show up across the valley, so the work is familiar either way. Call (833) 946-4320 to confirm your address.
Serving Paterson, NJ – Our Local Coverage Area
We serve Paterson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Paterson
We answer 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday, so most Paterson calls get a same-day visit. Call outside dispatch hours and we’ll book you into the next opening. Estimates are free.
Many gate installations need a permit, especially where the gate is tied to a structure or an operator. Ask the city’s building department about your specific property before work starts, and we’ll work with whatever the permit requires. Call (833) 946-4320 with questions.
Yes, we cover all of Paterson, from the 1st Ward rowhouse blocks to the lower streets near the Passaic River corridor, plus the neighboring towns. Give us your address when you call and we’ll confirm coverage and timing.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Paterson Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Paul Whitaker"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Allison Mercer"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Jamal Whitfield